Dust Free - Quality Timber Floor Finishes

Quick Enquiry

Services

It is our belief that a truly sleek finished timber floor should not have the typical “tell-tale” sanding lines, chatter marks, drum divots, scratches or undulations around the edges or heavy swirl marks left throughout the finish. Nor should you need to obtain the services of a cleaning contractor to remove all the fine dust once the floor is completed.

Installation of tongue and groove solid timber flooring;
Dust Free sanding; No cleaner will be required to take care of wood dust typically electrostatically clouded over walls, windows and architraves, paintings, fans, air conditioning units and kitchens.
Sealing and polishing your timber floors;
Advice on how to best look after your beautiful new timber floor;
Maintenance service to ensure your timber floor is always looking at its best.

Getting Started

We start with installing your new timber floor using tongue and groove solid timber flooring or perhaps removing existing floor coverings to uncover your existing timber floor.

Step 1 - Fixing boards to joists

Nails are pneumatically punched to a depth of 3mm to remove existing filler and reset the boards to the joists

Step 2 - Sanding

At Ingrain Technique, we use the German “Lagler” range of floor sanding machinery together with a “Polivac” rotary sander which in our experience is the most effective at dust collection. We start with a bigger grit of around 40 and progress through an average of 220 grit, however we are able to go as fine as 400 grit.

Step 3 - Filing nail holes

Nail holes being filled with colour matched putty.

services step 4

Step 4 - Edging

The edger and rotex orbital are coupled into a commercial dust extraction unit to further ensure an absolutely dust free service.

services step 5

Step 5 - Final sanding

During the final sanding process we build up heat beneath the
rotary, using the Polivac rotary sander, this polishes existing tannins through the grain of the timber, highlighting the true beauty of grains, colour and texture of the timber.

Step 6 - Applying floor finish

To give your floor its luster we apply the selected finish in matt, satin or gloss - 3 coats for domestic use and 4 coats for commercial premises.

No cleaner will be required to take care of wood dust typically electro-statically clouded over walls, windows, architraves, paintings, fans, air conditioning units and kitchens.

Maintenance – longevity

We will then provide you with advice on how to look after your beautiful new timber floor or perhaps you may wish to take advantage of our maintenance service, designed to suit your requirements, to ensure that your timber floor will always look its best.

Equipment

At Ingrain Technique after extensive research we have found the most effective floor sanding machinery.

German “Lagler” Hummel sanding machine with an endless belt for continuous sanding.